Feasibility of the Josephson voltage and current standards on a single chip

The quantum Josephson voltage standard is well established across the metrology community for many years. It relies on the synchronization of the flux tunneling in the S/I/S Josephson junctions (JJ) with the microwave radiation (MW) of frequency f such that V=Φ0fm, where m = 0, 1, 2, …. The phenomenon is called the Shapiro steps. Together with the quantum Hall resistance standard, the voltage standard forms the foundation of electrostatic metrology. The current is then defined as the ratio of the voltage and resistance. Realization of the quantum current standard would close the electrostatic metrological triangle of voltage–resistance–current. The current quantization I=2efm, the inverse Shapiro steps, was recently shown using the superconducting nanowires and small JJ. The effect is a synchronization of the MW with the Cooper pair tunneling. This paves the way to combine the JJ voltage and current standards on the same chip and demonstrate feasibility of the multi-standard operation. We show the voltage and current quantization on the same chip up to frequency of 10 GHz, corresponding to the amplitudes ∼ 20.67 μV and ∼ 3.2 nA, respectively. The accuracy of the voltage and current quantization, however, is relatively low, 35 and 100 ppk, respectively. We discuss measures to optimize the JJs, circuit, and environment to boost the amplitude and accuracy of the standards.