Microstructure evolution in A356 alloy subjected to controlled heat treatment regimes processes

Aluminium–silicon alloys are highly regarded for their lightweight and unique mechanical properties, making them crucial for various industrial applications. Achieving optimal mechanical behavior in Al-Si-based alloys necessitates meticulous control over their microstructure. The research investigated the impacts of heat treatment regimes on the microstructure of A356 hypoeutectic alloys by light optical microscope (OM), scanning electron microscope (SEM), and energy dispersive spectroscope (EDS). The alloy, produced via stir-casting, underwent homogenization at 540 °C/5 h, one-step (200 °C for 0.5–8 h (T1)) and two-step (T2 (200 °C/0.5 h/180 °C/0.5–8 h)), and T2L (200 °C/0.5 h/160 °C/0.5–8 h)) aging processes. The findings revealed significant microstructural changes due to heat treatment. Homogenization reduced the average grain size of eutectic silicon by 20.5%. The T1 treatment increased the grain size and changed the grain morphology with prolonged aging, negatively impacting the mechanical properties. The T2 and T2L treatments resulted in finer, more uniform grain structures. The T2L treatment produced the finest eutectic silicon and the most uniform grain distribution, indicating the superior potential for mechanical performance. Overall, this study underscores the importance of tailored heat treatment regimes to optimize the microstructure and enhance the structural sensitive properties of Al-Si alloys, benefiting automotive and aerospace industries.