Effects of axisymmetric confinement on vortical structures emanating from round turbulent jets

Confined jets occur in many engineering applications including combustion chambers, jet pumps, and chemical reactors. The effects of axisymmetric confinement on the vortical structures identified in a turbulent jet are investigated using large eddy simulation at a Reynolds number of 30 000 (based on nozzle exit conditions) and expansion ratio (chamber-to-nozzle diameter ratio) of five. The results obtained from the confined jet are compared with those of a free jet under the same nozzle exit flow conditions. A prominent recirculation zone forms between the expanding jet and the confining wall, resulting in early shear layer distortion and a shorter interaction length in the confined jet (0.85 jet diameters) compared to the free jet (1.15 jet diameters). Using the λ2 criterion for vortex identification, two dominant structural modes are identified in the near-exit region of the free jet: ring and helical modes. However, in the confined jet, the helical mode is absent, and the turbulent confined fluid accelerates the breakup of the ring vortices. The interaction of the secondary line vortices with the breaking structures leads to the formation of new hairpin-like vortices, which also contribute to further vortex breakup. These results explain the enhanced mixing performance of confined jets as the mixing is directly tied to the breakup of large vortical structures. Proper orthogonal decomposition modes are also presented to identify the structures/events with the highest contribution to the total turbulent kinetic energy in both flow fields.