Influence of carbon percentage on the wear and friction characteristics of ATOMET 4601 alloys in heavy-duty machinery

Heavy-duty machinery demands materials with strong wear resistance and good frictional properties, which conventional materials often lack. The knowledge of PM alloys’ friction and wear characteristics versus standard steel materials is limited. ATOMET 4601, a high-strength prealloyed powder with excellent compressibility, allows for parts with densities over 6.8 g/cm³. Carbon (0, 0.5, 1.0 wt.%) was added to enhance performance. These alloys, compacted to 75% of theoretical density and sintered at 1100 ± 10°C, were tested for wear and friction against EN31 steel. Results showed carbon improved tribological performance, with ATOMET 4601 + 1.0%C exhibiting the best wear resistance. Regression models and interaction plots indicated significant effects of load and speed on wear rate and coefficient of friction. Microstructural analysis revealed carbides and oxides in the ferrite matrix, with adhesive, abrasive, and oxidative wear as primary mechanisms.