PPS-reinforced poly(terphenylene) anion-exchange membranes with different quaternary ammonium groups for use in water electrolysers

The nature, concentration and spatial distribution of quaternary ammonium (QA) groups is instrumental for the performance of anion exchange membranes, primarily by augmenting the ion exchange capacity (IEC). This study compares a series of poly( meta -terphenylene)-based ion exchange membranes (mTPN), which vary in the attached quaternary ammonium group. The IEC of the membranes is 1.97, 2.20 and 3.70 mmol OH − g −1 for membranes functionalized with 1,4-diazabicyclo[2.2.2]octane (DABCO), trimethylamine (TMA), and methylated DABCO (DABCO-Me), respectively. The latter is obtained by methylation of the DABCO-functionalized membrane. To control swelling, all membranes are reinforced with a poly(phenylene sulfide) (PPS) fiber mat. The highest conductivity, achieved by PPS/mTPN/DABCO-Me, is 140 mS cm −1 in 1 M KOH and 237 mS cm −1 in 4 M KOH. An alkaline stability test over 2 months revealed that membranes with TMA and DABCO have a stable in-plane conductivity, measured in pure water, while the membrane with DABCO-Me showed a strongly increased resistance. On the other hand, a 1 month stability test showed that the through-plane conductivity of the membrane with DABCO-Me in 1 M KOH hardly changed. This indicates that conductivity by absorbed KOH solution is more relevant than the conductivity provided by the quaternary ammonium groups, and promises stable operation in the electrolyser. This is supported by an electrolyser test, where a stable voltage of 1.9 V at 0.25 A cm −2 was achieved, with no observed change in membrane resistance over a test duration of 100 h (60 °C, 4 M KOH, PGM-free catalyst). • a poly(terphenylene)-based AEM is reinforced with a PPS fiber mat. • Ammonium group is varied: trimethylamine, DABCO, methylated DABCO. • IEC increases 1.75 (DABCO) < 1.93 (TMA) < 3.00 (DABCO-Me) mmol Br/g. • In-plane conductivity degrades faster than through-plane conductivity. • Electrolyser performance was stable throughout the tested 100 h.

Authors

Institutions

Publication Details

Journal
Journal of Membrane Science
Published
2024-09-15
DOI
https://doi.org/10.1016/j.memsci.2024.123335
Citations
17
Primary Topic
Fuel Cells and Related Materials
Type
article
Field-Weighted Citation Impact
3.55

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

PPS-reinforced poly(terphenylene) anion-exchange membranes with different quaternary ammonium groups for use in water electrolysers

Jan Žitka, Michaela Plevová, Malikah Najibah, Jelena Stojadinović et al.
17 citations
Journal of Membrane Science
Fuel Cells and Related Materials
3.55
article

PPS-reinforced poly(terphenylene) anion-exchange membranes with different quaternary ammonium groups for use in water electrolysers

Jan Žitka, Michaela Plevová, Malikah Najibah, Jelena Stojadinović, Dirk Henkensmeier, Chulsung Bae, Asridin Dayan, Jaromír Hnát, Karel Bouzek
article en
17 citations

Abstract

The nature, concentration and spatial distribution of quaternary ammonium (QA) groups is instrumental for the performance of anion exchange membranes, primarily by augmenting the ion exchange capacity (IEC). This study compares a series of poly( meta -terphenylene)-based ion exchange membranes (mTPN), which vary in the attached quaternary ammonium group. The IEC of the membranes is 1.97, 2.20 and 3.70 mmol OH − g −1 for membranes functionalized with 1,4-diazabicyclo[2.2.2]octane (DABCO), trimethylamine (TMA), and methylated DABCO (DABCO-Me), respectively. The latter is obtained by methylation of the DABCO-functionalized membrane. To control swelling, all membranes are reinforced with a poly(phenylene sulfide) (PPS) fiber mat. The highest conductivity, achieved by PPS/mTPN/DABCO-Me, is 140 mS cm −1 in 1 M KOH and 237 mS cm −1 in 4 M KOH. An alkaline stability test over 2 months revealed that membranes with TMA and DABCO have a stable in-plane conductivity, measured in pure water, while the membrane with DABCO-Me showed a strongly increased resistance. On the other hand, a 1 month stability test showed that the through-plane conductivity of the membrane with DABCO-Me in 1 M KOH hardly changed. This indicates that conductivity by absorbed KOH solution is more relevant than the conductivity provided by the quaternary ammonium groups, and promises stable operation in the electrolyser. This is supported by an electrolyser test, where a stable voltage of 1.9 V at 0.25 A cm −2 was achieved, with no observed change in membrane resistance over a test duration of 100 h (60 °C, 4 M KOH, PGM-free catalyst). • a poly(terphenylene)-based AEM is reinforced with a PPS fiber mat. • Ammonium group is varied: trimethylamine, DABCO, methylated DABCO. • IEC increases 1.75 (DABCO) < 1.93 (TMA) < 3.00 (DABCO-Me) mmol Br/g. • In-plane conductivity degrades faster than through-plane conductivity. • Electrolyser performance was stable throughout the tested 100 h.

Journal of Membrane ScienceVol. 713
Rensselaer Polytechnic Institute (US), Korea University (KR), Fuel Cells and Hydrogen (BE), Czech Academy of Sciences, Institute of Macromolecular Chemistry (CZ), Wojewódzki Szpital Zespolony (PL), École Polytechnique Fédérale de Lausanne (CH), Korea Institute of Science and Technology (KR), Korea University of Science and Technology (KR), University of Chemistry and Technology, Prague (CZ)
Korea Institute of Science and Technology, Fuel Cells and Hydrogen Joint Undertaking
Clean water and sanitation
Openalex Percentile: Top 7%
Fuel Cells and Related Materials
3.55
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.