Experimental Investigation on Axial Strength Improvement of Cold-Formed Steel Jacketed Concrete Stub Columns

Abstract This paper presents an experimental study on the behavior of low-strength concrete columns confined with cold-formed steel under axial compression. The laboratory test specimens consist of four groups of rectangular concrete stub columns in the size of 130 $$\times $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mo>×</mml:mo> </mml:math> 200 mm cross section and 300 mm height; the first group composes of the unconfined specimens, while the other three contain the confined specimens under 0%, 25% and 50% sustained axial loads. The jackets are made of two G450-grade channel cold-formed steel sections of 2.4 mm thickness welded together. No bonding material is used between the core concrete and the steel jacket. From the results, it is found that the cold-formed steel jacketing can increase the axial strengths of the unconfined concrete specimens by approximately 40-65%. The strength increase comes mainly from the confinement action, as only small axial deformation is detected in the jacket. Based on the given amount of prescribed preloads in this study, the presence of preload in the column does not have a significant effect on the increase in strength of the confined concrete columns. The measured strength enhancement ratio and the confinement ratio of the tested specimens are compared using five existing strength predictive equations. The performance of the unbonded cold-formed steel jacketing technique adopted in the stub columns is observed to closely conform with the predictive confinement model of the concrete-filled tubes.