499 Effect of adding plant extracted hydrolysable tanning and saponin combination to prairie blend pelleted feed products on accumulative gas production kinetics and methane emission in ruminant systems

Abstract The objectives of this study were to study the effect of adding plant extracted hydrolysable tanning (HT) and saponin (S) combination as a combined phytochemical feed additive (HTS) on in vitro accumulative gas production kinetics and methane (CH4) emission of blend pelleted feed products in ruminant systems. Four combination levels [0 (control), 1.5 (1% HT + 0.5% S), 3 (2% HT + 1%S), 4.5 (3% HT + 1.5% S)] were added to canola meal and pea mixtures with two different ratios (CMP1: 50:50; CMP2: 70:30) which were used to make Prairie blend pellet feed products. The accumulative gas production kinetics and CH4 were determined using in vitro systems. The ruminal fluid was obtained from rumen fistulated lactation dairy cows. The experimental design was a randomized complete block design with the HTS level as a fixed effect and in vitro run with fistulated animals as a random effect. The data were analyzed using SAS Mixed Procedure. Polynomial contract was used to determine linear and quadratic relationship. The results showed that adding HTS level linearly reduced asymptotic production a) from 110.5 to 82.7 mL/g DM (P = 0.043) and average production at one-half of asymptotic production (AP) from 11.9 to 9.5 mL (P = 0.069) without significantly affecting gas production fractional rate (c, %/h) with an average of 0.58 ± 0.49 %/h and lag time with an average of 1.95 ± 0.50 h. As to CH4 emission at different incubation times, the result showed that at short incubation times (2 h, 4 h, 12 h), adding HTS had numerically reduced methane emission (CH4) from 2.77 to 0.98 mL/g (at 2 h) and 4.39 to 1.38 mL/g (at 4 h). with increasing HTS level, CH4 was significantly quadratically reduced (P = 0.028) at 12 h incubation time from 8.31 to 5.76 mL/g. After long incubation (24 h), adding HTS did not have significant impact on CH4. In conclusion, adding HTS to prairie blend pellet feed products significantly affected gas production kinetics (the asymptotic production and average production at one-half of asymptotic production). Adding HTS had an increased potential to decrease CH4 emission at short incubation times.

Authors

Institutions

Publication Details

Journal
Journal of Animal Science
Published
2024-09-01
DOI
https://doi.org/10.1093/jas/skae234.167
Primary Topic
Food Quality and Safety Studies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

499 Effect of adding plant extracted hydrolysable tanning and saponin combination to prairie blend pelleted feed products on accumulative gas production kinetics and methane emission in ruminant systems

María E. Rodríguez Espinosa, Peiqiang Yu, H.A. Lardner, Rex N Newkirk et al.
Journal of Animal Science
Food Quality and Safety Studies
article

499 Effect of adding plant extracted hydrolysable tanning and saponin combination to prairie blend pelleted feed products on accumulative gas production kinetics and methane emission in ruminant systems

María E. Rodríguez Espinosa, Peiqiang Yu, H.A. Lardner, Rex N Newkirk, Taufiq Hidayat
article en

Abstract

Abstract The objectives of this study were to study the effect of adding plant extracted hydrolysable tanning (HT) and saponin (S) combination as a combined phytochemical feed additive (HTS) on in vitro accumulative gas production kinetics and methane (CH4) emission of blend pelleted feed products in ruminant systems. Four combination levels [0 (control), 1.5 (1% HT + 0.5% S), 3 (2% HT + 1%S), 4.5 (3% HT + 1.5% S)] were added to canola meal and pea mixtures with two different ratios (CMP1: 50:50; CMP2: 70:30) which were used to make Prairie blend pellet feed products. The accumulative gas production kinetics and CH4 were determined using in vitro systems. The ruminal fluid was obtained from rumen fistulated lactation dairy cows. The experimental design was a randomized complete block design with the HTS level as a fixed effect and in vitro run with fistulated animals as a random effect. The data were analyzed using SAS Mixed Procedure. Polynomial contract was used to determine linear and quadratic relationship. The results showed that adding HTS level linearly reduced asymptotic production a) from 110.5 to 82.7 mL/g DM (P = 0.043) and average production at one-half of asymptotic production (AP) from 11.9 to 9.5 mL (P = 0.069) without significantly affecting gas production fractional rate (c, %/h) with an average of 0.58 ± 0.49 %/h and lag time with an average of 1.95 ± 0.50 h. As to CH4 emission at different incubation times, the result showed that at short incubation times (2 h, 4 h, 12 h), adding HTS had numerically reduced methane emission (CH4) from 2.77 to 0.98 mL/g (at 2 h) and 4.39 to 1.38 mL/g (at 4 h). with increasing HTS level, CH4 was significantly quadratically reduced (P = 0.028) at 12 h incubation time from 8.31 to 5.76 mL/g. After long incubation (24 h), adding HTS did not have significant impact on CH4. In conclusion, adding HTS to prairie blend pellet feed products significantly affected gas production kinetics (the asymptotic production and average production at one-half of asymptotic production). Adding HTS had an increased potential to decrease CH4 emission at short incubation times.

Journal of Animal ScienceVol. 102(Supplement_3)
University of Saskatchewan (CA)
Openalex Percentile: Top 82%
Food Quality and Safety Studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.