Dynamic responses of steep bedding slope-tunnel system under coupled rainfall-seismicity: Shaking table test

The coupling effects of rainfall, earthquake, and complex topographic and geological conditions complicate the dynamic responses and disasters of slope-tunnel systems. For this, the large-scale shaking table tests were carried out to explore the dynamic responses of steep bedding slope-tunnel system under the coupling effect of rainfall and earthquake. Results show that the slope surface and elevation amplification effect exhibit pronounced nonlinear change caused by the tunnel and weak interlayers. When seismic wave propagates to tunnels, the weak interlayers and rock intersecting areas present complex wave field distribution characteristics. The dynamic responses of the slope are influenced by the frequency, amplitude, and direction of seismic waves. The acceleration amplification coefficient initially rises and then falls as increasing seismic frequency, peaking at 20 Hz. Additionally, the seismic damage process of slope is categorized into elastic (2–3 m/s 2 ), elastoplastic (4–5 m/s 2 ) and plastic damage stages (≥6.5 m/s 2 ). In elastic stage, Δ M PGA (ratio of acceleration amplification factor) increases with increasing seismic intensity, without obvious strain distribution change. In plastic stage, Δ M PGA begins to gradually plummet, and the strain is mainly distributed in the damaged area. The modes of seismic damage in the slope-tunnel system are mainly of tensile failure of the weak interlayer, cracking failure of tunnel lining, formation of persistent cracks on the slope crest and waist, development and outward shearing of the sliding mass, and buckling failure at the slope foot under extrusion of the upper rock body. This study can serve as a reference for predicting the failure modes of tunnel-slope system in strong seismic regions.