Steering Mechanism and Capability of Forced Steering Device for Low-Floor Light Rail Train

For 70% low-floor trains on the light rail lines in Changchun, a multi-linkage forced steering device (FSD) is developed aiming at relieving the independently rotating wheelset (IRW) excessive flange wear and improving IRW bogie system running safety on curve line. This FSD employs guiding mode of steering four independently rotating wheels separately in a two-axle bogie, that is, four FSDs are employed to work together to realize the steering of a two-axle bogie. One side of an FSD is connected to the axle of an independently rotating wheel while the other side is attached to the front or rear vehicle body. When train passes through curve, the yaw angle between the IRW bogie and the front or rear carbody drives the linkage system to rotate to guide the independently rotating wheel towards its radial position. The coupled vehicle-track dynamics model for a 6-module single-type low-floor light rail train is developed and simulations of the train passing through tangent and curved tracks with and without FSD proposed are carried out. The results indicate that the FSD can improve the IRW restoring capability on tangent track and curve negotiation performance on whether sharp, medium, or large curved track. For example, passing through a curve with a radius of 200[Formula: see text]m, the IRW friction work has the biggest drop by 62.07% and the wheelset attack angle is second with a reduction rate of 55.02%. Adopting of larger steering stiffness, smaller steering clearance, and lever ratio greater than the ideal value can guarantee the higher steering ability of FSD. Besides, lower longitudinal stiffness of the trailer primary suspension is recommended because it can also enhance the steering ability of the FSD.