AC Electric Conductivity of High Pressure and High Temperature Formed NaFePO4 Glassy Nanocomposite

Olivine-like NaFePO₄ glasses and nanocomposites are promising materials for cathodes in sodium batteries. Our previous studies focused on the preparation of NaFePO₄ glass, transforming it into a nanocomposite using high-pressure-high-temperature treatment, and comparing both materials' structural, thermal, and DC electric conductivity. This work focuses on specific features of AC electric conductivity, containing messages on the dynamics of translational processes. Conductivity spectra measured at various temperatures are scaled by apparent DC conductivity and plotted against frequency scaled by DC conductivity and temperature in a so-called <i>master curve</i> representation. Both glass and nanocomposite conductivity spectra are used to test the (effective) exponent using Jonscher's scaling law. In both materials, the values of exponent range from 0.3 to 0.9, with different relation to temperature. It corresponds to the electronic conduction mechanism change from low-temperature Mott's variable range hopping (between Fe²⁺/Fe³⁺ centers) to phonon-assisted hopping, which was suggested by previous DC measurements. Following the pressure treatment, AC conductivity activation energies were reduced from EAC≈0.40 eV for glass to EAC≈0.18 eV for nanocomposite and are lower than their DC counterpart, following a typical empirical relation with the value of the exponent. While pressure treatment leads to a 2-3-orders-of-magnitude rise in the AC and apparent DC conductivity due to the reduced distance between the hopping centers, a nonmonotonic relation of AC power exponent and temperature is observed. It occurs due to the disturbance of polaron interactions with Na⁺ mobile ions.