Monte Carlo simulation of shielding materials in storage drums for 241Am-Be disused sealed radioactive sources

Disused Sealed Radioactive Sources (DSRS) containing neutron sources such as 241 Am-Be require careful management due to neutron radiation. However, finding readily available and effective combination layer shielding materials for practical use to safely contain 241 Am-Be can be challenging. The main objective of this study is to investigate the configuration of shielding materials and determine the maximum activity of 241 Am-Be sources that can be safely stored in a 200-L drum. A three-layer shielding approach using a 200-L drum as a storage container, with sequential layers of lead (Pb), polyethylene (PE), and ordinary Portland concrete (OPC), achieves the lowest dose rates compared to other combination sequences, as shown by Monte Carlo simulations. With a fixed lead thickness and varying polyethylene and ordinary Portland concrete thicknesses, Monte Carlo simulations using the Particle and Heavy Ion Transport code System (PHITS) demonstrate that this drum design can safely accommodate activities ranging from 22.01 Ci to 72.92 Ci of 241 Am-Be. The fitted model equation determines the required polyethylene thickness for any activity within this range. Additionally, case-based simulation results indicate that Indonesia's total inventory of 241 Am-Be DSRS can be stored in three 200-L drums with a polyethylene thickness of 15 cm. This configuration meets international standards, ensuring the dose rate does not exceed 2 mSv/h at the surface and 0.1 mSv/h at 1 m from the drum's surface.