Experimental investigation into friction stir welding of AA6061-T6 and magnesium AZ31B alloy using copper backing plate

Abstract Aluminium-magnesium alloys are lightweight and possess superior properties, making them ideal for applications in aerospace, railway, automotive, and marine structures. However, these alloys are challenging to fabricate using traditional fusion welding due to various metallurgical issues. This study investigates the feasibility of joining 3 mm thick dissimilar alloys of aluminium AA6061-T6 and magnesium AZ31B using the friction stir welding (FSW) process with copper as a backing plate. The effects of FSW process parameters, including tool rotational speed (380, 545, 765 rpm), weld speed (20, 31.5, 50 mm min −1 ), and tilt angle (1°, 2°, 3°), on tensile properties were examined using Taguchi-based grey relational analysis. Temperatures were recorded during the FSW process under different conditions on both sides of the joint. The highest tensile strength of 130.72 MPa, with a joint efficiency of 67.85%, was achieved at a tool rotational speed of 765 rpm, a welding speed of 50 mm min −1 , and a tilt angle of 2°. Analysis of variance (ANOVA) for the grey relational grade indicated that the tilt angle had the highest percentage contribution of 43.60%. This study demonstrates the significant influence of FSW parameters on the mechanical properties of aluminium-magnesium joints and highlights the optimal conditions for achieving high joint strength and efficiency.