Investigating a siderophore-based approach for the recovery of critical metals from waste streams and leach solutions using microorganisms

As technological advancements progress and unsustainable consumerism of electrical devices rapidly increases, the demand for critical metals continues to rise. The limited supply of these metals, driven by the depletion of non-renewable natural resources, calls for the recycling of waste materials and the development of sustainable and cost-effective extraction methods. Conventional methods of leaching such as pyrometallurgy pose threats to the environment by creating slags and releasing toxic secondary materials. Biohydrometallurgy emerges as an environmentally friendly method to extract metals from low-grade ores and waste material. Siderophores are secondary metabolites secreted by microorganisms that have the ability to selectively chelate certain metals. By immobilizing these siderophores for subsequent bioleaching, target metals can be extracted from multielement solutions. This research focuses on optimizing the immobilization efficiency of the siderophore desferrioxamine B (DFOB) in sodium alginate using physical entrapment for the removal of gallium. Four parameters were varied to find optimal conditions: sodium alginate concentration (1 – 4 % w/v), calcium chloride concentration (1 – 10% w/v), agitation time (0.25 – 10 hours), and DFOB concentration (1 – 4 mM). Using UV-Vis spectroscopy, free siderophore concentration could be determined. After 30 runs, the highest immobilization yield of 80.05% was determined at 2.5% sodium alginate, 10% calcium chloride—the highest concentration tested—after 5.13 hours with a concentration of 2.25 mM DFOB. Design Expert-13 software was used to analyze all experimental results. 2D graphs support that DFOB immobilization depends on responsive parameters, CaCl2 demonstrating the largest impact.