Numerical Investigation of the Thermal Performance of Air-Cooling System for a Lithium-Ion Battery Module Combined with Epoxy Resin Boards

Lithium-ion batteries (LIBs) have the lead as the most used power source for electric vehicles and grid storage systems, and a battery thermal management system (BTMS) can ensure the efficient and safe operation of lithium-ion batteries. Epoxy resin board (ERB) offers a wide range of applications in LIBs due to its significant advantages such as high dielectric strength, electrical insulation, good mechanical strength, and stiffness. This study proposes an air-cooled battery module comprised of sixteen prismatic batteries incorporating an ERB layer between the batteries. To compare the performance of the ERB-based air-cooling system, two other air-cooling structures are also assessed in this study. Three-dimensional numerical models for the three cases are established in this paper, and the heat dissipation processes of the battery module under varying discharge rates (1C, 2C, and 5C) are simulated and analyzed to comprehensively evaluate the performance of the different cooling systems. Comparative simulations reveal that incorporating ERB into the battery assembly significantly reduces battery surface temperatures and promotes temperature uniformity across individual batteries and the entire pack at various discharge rates. Notably, under 5C discharge conditions, the ERB-based thermal management system achieves a maximum battery surface temperature increase of 16 °C and a maximum temperature difference of 8 °C between batteries. Additionally, this paper also analyzes the impact of battery arrangement on air-cooling system performance. Therefore, further optimization of the structural design or the integration of supplementary cooling media might be necessary for such demanding conditions.