Effects of Growth and Treatment Conditions on the Quality of Norway Spruce (Picea abies L.) Sawn Timber

A study was conducted to improve the effectiveness of silvicultural production of structural sawn timber from softwoods. It intends to explore prediction methods for mechanical timber quality. The study material was obtained from six stands divided into age groups of approximately 40- and 80-year-old trees (examining the influence of age). The stands were differentiated by their applied thinning system of thinning from below or above (examining the influence of the thinning system). Resulting from these different levels of data, i.e., stand parameters, tree anatomy, and visual board properties are examined and analyzed in ordinal logistic models and linear mixed models. Visual board properties were discerned by means of the German standard for visual grading of sawn timber. The mechanical board properties were measured in on-edge bending strength tests and allocated into strength classes, which were modeled in dependence of visual characteristics and forestry conditions. The evaluation of mechanical properties attributed a significant loss of timber quality to short rotation periods, non-ideal water supply, and a single-tree management system. The prediction capabilities of models based on site and tree characteristics were on par with the accuracy of visual grading. Management adaptations by intense thinning from above can lead to a significant decline in Norway spruce (Picea abies L.) timber quality when site factors coincide. Particular care should be taken in the management of locations with high yield potential. Non-destructive evaluation based on site characteristics combined with terrestrial laser scan data of tree characteristics has potential as a pregrading method.