Structure formation in the «clay soil – carbide sludge» dispersed system

Introduction.Clay soil is a multiphase, multicomponent aluminosilicate dispersed system with specific properties determined not only by its composition but also by the formation of coagulative and transition contacts (binds) between the soil particles.One of the methods of changing soil properties is the introduction of active mineral additives that promote the formation of phase contacts (binds) between soil particles as a result of the pozzolanic reaction.The effectiveness of using carbide sludge, which is a multi-tonnage lime-containing waste (the content of active calcium oxide reaches 56%) as an additive, has been proved.However, to date, the proposed mechanism of interaction in the clay soil -carbide sludge system is based only on the literature data and has not been experimentally verified.The purpose of this research is to study the mechanism of structure formation in the clay soil -carbide sludge dispersed system.Methods and materials.A soil model has been created by mixing saponite-containing material with sand, which corresponds to the composition and properties of sandy loam.The carbide sludge in the form of a suspension was selected from the sludge collector, dried to a constant mass and sieved.Microstructural analysis, differential thermal analysis (DTA), and X-ray phase analysis were used to study the mechanism of structure formation.Results and discussions.Based the results of the differential thermal analysis, there is a decrease in the intensity of the endothermic effect in the range of 460 to 470C associated with the decomposition of calcium hydroxide in the treated sample.Additionally, an endothermic effect is observed at 750C, which indicating the decomposition of calcium silicate hydrate.The results of differential thermal analysis are confirmed by X-ray phase analysis, which shows the presence of tobermorite group hydrosilicates in the reaction medium.The study of the microstructure of the analyzed mixtures revealed a decrease in the specific volume of pores with a diameter of 4-5 nm in the modified clay soil.This is associated with gelling from particles of new hydrate formations.Besides that, the volume of pores with a diameter of more than 6 nm increased, which indicates the process of contraction.Conclusion.The mechanism of structure formation in the clay soil -carbide sludge system has been established.

Authors

Publication Details

Journal
Nanotechnologies in Construction A Scientific Internet-Journal
Published
2024-08-31
DOI
https://doi.org/10.15828/2075-8545-2024-16-4-375-382
Citations
2
Primary Topic
Geotechnical and Geomechanical Engineering
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Structure formation in the «clay soil – carbide sludge» dispersed system

A. M. Ayzenshtadt, М. А. Фролова, Yu. V. Sokolova, Evgeniy Korolev
2 citations
Nanotechnologies in Construction A Scientific Internet-Journal
Geotechnical and Geomechanical Engineering
article

Structure formation in the «clay soil – carbide sludge» dispersed system

A. M. Ayzenshtadt, М. А. Фролова, Yu. V. Sokolova, Evgeniy Korolev
article en
2 citations

Abstract

Introduction.Clay soil is a multiphase, multicomponent aluminosilicate dispersed system with specific properties determined not only by its composition but also by the formation of coagulative and transition contacts (binds) between the soil particles.One of the methods of changing soil properties is the introduction of active mineral additives that promote the formation of phase contacts (binds) between soil particles as a result of the pozzolanic reaction.The effectiveness of using carbide sludge, which is a multi-tonnage lime-containing waste (the content of active calcium oxide reaches 56%) as an additive, has been proved.However, to date, the proposed mechanism of interaction in the clay soil -carbide sludge system is based only on the literature data and has not been experimentally verified.The purpose of this research is to study the mechanism of structure formation in the clay soil -carbide sludge dispersed system.Methods and materials.A soil model has been created by mixing saponite-containing material with sand, which corresponds to the composition and properties of sandy loam.The carbide sludge in the form of a suspension was selected from the sludge collector, dried to a constant mass and sieved.Microstructural analysis, differential thermal analysis (DTA), and X-ray phase analysis were used to study the mechanism of structure formation.Results and discussions.Based the results of the differential thermal analysis, there is a decrease in the intensity of the endothermic effect in the range of 460 to 470C associated with the decomposition of calcium hydroxide in the treated sample.Additionally, an endothermic effect is observed at 750C, which indicating the decomposition of calcium silicate hydrate.The results of differential thermal analysis are confirmed by X-ray phase analysis, which shows the presence of tobermorite group hydrosilicates in the reaction medium.The study of the microstructure of the analyzed mixtures revealed a decrease in the specific volume of pores with a diameter of 4-5 nm in the modified clay soil.This is associated with gelling from particles of new hydrate formations.Besides that, the volume of pores with a diameter of more than 6 nm increased, which indicates the process of contraction.Conclusion.The mechanism of structure formation in the clay soil -carbide sludge system has been established.

Nanotechnologies in Construction A Scientific Internet-JournalVol. 16(4)
Russian Science Foundation
Life in Land
Openalex Percentile: Top 84%
Geotechnical and Geomechanical Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.