Multivariate process capability analysis for evaluating metal additive manufacturing via electron beam melting

Abstract Electron beam melting (EBM) as one of the relatively new metal AM techniques showed promising and increasing applications. Therefore, there is a need to evaluate the quality of the EBM process using its critical quality characteristics. However, EBM and different AM process parts have many functionally or statistically correlated quality characteristics. Consequently, the quality characteristics of the EBM process should be evaluated together. Therefore, this research aims to evaluate the quality of the EBM process using a multivariate process capability index (MPCI). In this study, the dimensional accuracy in different directions is considered as a quality characteristics. The proposed methodology involves producing a large sample of small specimens of square shape using EBM technology. Three critical dimensions of the specimen in the X, Y, and Z axis are investigated as quality characteristics. The dimensions of quality characteristics are measured using a precise measurement device. The normality and stability assumptions of the collected data are investigated using skewness measure, and multivariate process control chart respectively. Then a large sample of the multivariate normal data is simulated using computer software to estimate the percent of nonconforming (PNC) from the established specification limits, which is used to estimate MPCI. Finally, the capable tolerance of the process is estimated and the sensitivity analysis of variation is investigated. The results show the capability of the EBM process under different specification limits designations. Estimating MPCI revealed that the EBM process is capable under very coarse limits only. Moreover, the sensitivity analysis showed that variation in quality characteristics data is very sensitive for MPCI estimation, especially variation in width quality characteristic.