Biomimetic Soft Robotic Jellyfish for Lentic Ecosystem Monitoring

Environmental monitoring of lentic ecosystems is well suited for swarm robotics applications since they can operate autonomously and cover large regions. For such a task, a locomotion mechanism is necessary for traversal. Due to the challenging nature of underwater environments, researchers often draw inspiration from nature to improve robot mechanical performance. A box jellyfish in a good inspiration due to their efficient jet propulsion. Soft and smart materials are helpful in mimicking their propulsion because they can perform flexible and complex movement. Shape memory alloy (SMA) springs have been used for this purpose, but their slow actuation rate is a well-known disadvantage. This project aims to improve cycle rate and thus swim speed by implementing a bistable spring configuration into a soft robotic jellyfish. The bistable mechanism stores energy slowly in the expansion of the elastic silicone bell, then releases it suddenly in a contraction which propels the robot forwards with a higher force than would be possible with direct SMA actuation. Additionally, the antagonistic arrangement of SMA springs reset each other and produce the same outward expansion on both up and down stroke, improving cycles speeds by removing the need for a dedicated reset stroke which is typically required before using the springs again. Also, increasing the number of spring pairs does not interfere with the actuation, meaning cycle rates can be further improved by cycling which pair of springs is active. The proof-of-concept device operates at a frequency of 0.4 Hz, and produces enough thrust while tethered to swim through a tank. Future work involves performing fluid visualization tests to validate a simple mathematical model of flow through the bell, as well as optimize the design, integrate onboard environment sensors and implement autonomy to allow operation in a larger swarm.