Benefits of front coating crystalline scintillator screens for phase-contrast synchrotron micro-tomography

Transparent crystalline scintillators such as cerium-doped YAG or LuAG are widely used in X-ray imaging for the indirect detection of X-rays. The application of reflective coatings on the front side to improve the optical gain is common practice for flat panel detectors with CsI or Gd₂O₂S powder scintillators but still largely unknown for crystalline scintillators such as LuAG. This work shows experimentally and quantitatively how a black and reflective coating on the X-ray side of a 2 mm LuAG:Ce scintillator improves the image quality compared to a 2 mm LuAG:Ce scintillator without a coating. The measurements have been done for two different distances, with 2 m and 29.7 m on the BM18 beamline of the European Synchrotron. The Modulation Transfer Function (MTF) and the Signal-to-Noise-Ratio (SNR²) power spectrum as well as contrast-to-noise ratio are used for comparing image quality. Propagation-based phase contrast strongly enhances the SNR² amplitudes (gain ≈10 from 2 m to 29.7 m object-detector distance) of the raw images' spectrum independent of the scintillator coating. For both detector positions, the reflective coating is able to raise SNR² by up to 80% through the improved optical gain, while black coating does the opposite (decrease SNR² by 20%) with respect to no coating. With the tested optical setups, changes in MTF /sharpness between the coatings are minor. Comparing CNR² in CT scans of a multi-material sample, in this case an electric motor, we observe the reflective coating yielding better material contrast for plastic and air. Application and effect of Wiener-deconvolution, along with Paganin-type phase retrieval, are also discussed in the context of CT image quality.