Study of Properties of Water-Dispersion Paint and Varnish Compositions with the Content of Modified Mineral Filler

This article presents the results of research work devoted to improving the characteristics of paint and varnish coatings based on aqueous dispersions of polyacrylates; it is proposed to modify them by introducing mineral raw materials as fillers and hydrated lime, with subsequent processing in a vortex layer apparatus. The introduction of activated diatomite does not cause the deterioration of covering power, adhesion or an increase in the porosity of the paint material. The modification of coatings contributes to an increase in their operational properties, which can be associated with a reduction in the free volume in the composite and the formation of polymer boundary layers with modified physical and chemical properties. The aim of this study is to obtain a water-dispersion paint and varnish composition containing modified diatomite on a polyacrylate basis and, subsequently, study its main physical and mechanical parameters. The work has been carried out by the following method: determination of porosity, adhesion, elasticity and covering power of the control composition; determination of porosity, adhesion, elasticity and covering power of the obtained composites using modified filler; investigation of the influence of radiation on the infrared spectrum of the paint coating surface using a FLIRB620 thermal imager. As a result of this research work, it was noticed that the modification of water dispersions with silica-activated diatomite helps to eliminate the main disadvantages of materials and coatings based on acrylate binders—low water resistance and low physical and mechanical characteristics. The introduction of modified diatomite into water-emulsion paint on an acrylate base does not lead to the deterioration of the main performance characteristics of paint coatings—porosity, adhesion, elasticity and covering.