Methodology for Performing Bathymetric and Photogrammetric Measurements Using UAV and USV Vehicles in the Coastal Zone

The coastal zone is constantly exposed to marine erosion, rising water levels, waves, tides, sea currents, and debris transport. As a result, there are dynamic changes in the coastal zone topography, which may have negative effects on the aquatic environment and humans. Therefore, in order to monitor the changes in landform taking place in the coastal zone, periodic bathymetric and photogrammetric measurements should be carried out in an appropriate manner. The aim of this review is to develop a methodology for performing bathymetric and photogrammetric measurements using an Unmanned Aerial Vehicle (UAV) and an Unmanned Surface Vehicle (USV) in a coastal zone. This publication shows how topographic and bathymetric monitoring should be carried out in this type of zone in order to obtain high-quality data that will be used to develop a Digital Terrain Model (DTM). The methodology for performing photogrammetric surveys with the use of a drone in the coastal zone should consist of four stages: the selection of a UAV, the development of a photogrammetric flight plan, the determination of the georeferencing method for aerial photos, and the specification as to whether there are meteorological conditions in the studied area that enable the implementation of an aerial mission through the use of a UAV. Alternatively, the methodology for performing bathymetric measurements using a USV in the coastal zone should consist of three stages: the selection of a USV, the development of a hydrographic survey plan, and the determination of the measurement conditions in the studied area and whether they enable measurements to be carried out with the use of a USV. As can be seen, the methodology for performing bathymetric and photogrammetric measurements using UAV and USV vehicles in the coastal zone is a complex process and depends on many interacting factors. The correct conduct of the research will affect the accuracy of the obtained measurement results, the basis of which a DTM of the coastal zone is developed. Due to dynamic changes in the coastal zone topography, it is recommended that bathymetric measurements and photogrammetric measurements with the use of UAV and USV vehicles should be carried out simultaneously on the same day, before or after the vegetation period, to enable the accurate measurement of the shallow waterbody depth.