One‐Pot Carbothermal Reduction Preparation of Cu‐BTC@Cu/C Heterostructure for Enhanced Nonenzymatic Electrochemical Glucose Sensing

Abstract A heterostructure based on MOFs with a small lattice mismatch is ideal for improving glucose‘s electrochemical sensing performance. Herein, a novel one‐pot carbothermal reduction technique to prepare Cu‐BTC@Cu/C heterostructure with intimate interfacial contact and high yield was developed, by in situ integrating Cu‐BTC (Cu 3 (BTC) 2 ⋅ 3H 2 O) and its derived Cu/C nanocomposites. Structure characterizations demonstrated that Cu‐BTC@Cu/C heterostructure shows a synergistic effect in the combination of these two components, with more electrochemical active sites and lower resistance. Compared with each individual component, Cu‐BTC@Cu/C heterostructure exhibits better glucose electrooxidation performance. Under optimal condition, an extremely sensitive nonenzymatic glucose sensor with a low detection limit of 6.78 μM, sensitivity of 911.03 μA mM −1 cm −2 , linear range of 0.001–2.0 mM, and anti‐interference performance is presented. Meanwhile, the newly constructed sensor was effectively employed for detecting glucose in honey sample with perfect recoveries, showing its great potential toward glucose monitoring in real sample. In addition, it has been demonstrated Cu(II) can be induced into Cu(I) by glucose in solution, while Cu(I) could be electrochemically converted to Cu(II), therefore achieving a Cu(I)/Cu(II) redox cycle. It offers a promising strategy for synthesis of advanced electrocatalysts with high efficiency and promising applications in this paper.