Protective Coatings Based on the Organosilicon Derivatives of Fatty Acids Obtained by the Thiol-Ene Click Reaction

This article describes the synthesis of a hydrophobic protective coating for concrete based on a silane derivative of fatty acids. The coating was obtained through a thiol-ene click addition reaction using methyl oleate and 3-mercaptopropyltrimethoxysilane in the presence of the photoinitiator 2,2-dimethoxy-2-phenylacetophenone (DMPA). This reaction proved to be more efficient compared with other tested (photo)initiators, considering the double bond conversion of oleate. The coating was applied to concrete using two methods: immersion and brushing. Both methods exhibited similar consumption of methyl oleate-based silane (UVMeS) at approximately 20 g/m². The hydrophobic properties of the coatings were evaluated based on the contact angle, which for the modified surfaces was above 93°, indicating their hydrophobic nature. The penetration depth of the silane solution into the concrete was also studied; it was 5-7 mm for the immersion method and 3-5 mm for the brushing method. The addition of tetraethoxysilane (TEOS) to the silane solution slightly improved the barrier properties of the coating.