Research on microstructure evolution of laser surface quenching of ductile cast iron

Abstract Ductile cast iron is widely used in the manufacturing of components and dies due to its excellent performance and low cost. Laser surface quenching can further improve its performance and extend its service life. This article uses scanning electron microscopy, electron backscattered scattering detection and microhardness tester to systematically analyse the microstructure evolution of the melted zone, hardened zone, and matrix of ductile cast iron with laser surface quenching. The hardening zone can be divided into two layers: one layer contains a large amount of martensite, graphite, and bits of residual austenite, and the other layer contains a composite structure of graphite, ferrite, layered martensite+austenite+Fe3C. On the basis of microstructure research, the determination and optimization methods of the depth of the laser surface hardening zone and the process are formed, providing a basis for the selection and optimization of the laser surface hardening process for ductile cast iron.