High-Performance Polyamidoxime Porous Membrane Prepared by the In Situ Modification/Nonsolvent-Induced Phase Separation Strategy for Uranium Extraction from Seawater

The abundance of uranium (U(VI)) reserves in seawater makes it crucial to develop economically efficient methods for uranium extraction from seawater. In this work, an enhanced polyamidoxime porous membrane (PAOM) was fabricated by pre-in situ amidoxime modification combined with nonsolvent-induced phase separation (NIPS). The strategy of in situ modification of the polyacrylonitrile (PAN) solution served to enhance the homogeneity of the reaction and avoid the destruction of the membrane matrix and pore structure. Compared with the control sample (AOPM), PAOM possessed better mechanical strength and hydrophilicity. The introduction of polyvinylpyrrolidone (PVP) formed a porous structure in PAOM, improving spatial accessibility and facilitating the diffusion transport and capture of UO₂²⁺ inside the membrane. The more uniform and abundant distribution of amidoxime groups in PAOM gave it ultrahigh adsorption capacity and selectivity. The equilibrium adsorption capacity and <i>K</i>_d value of PAOM were 1.72 and 5.51 times higher than those of AOPM. Meanwhile, PAOM also demonstrated good recyclability, with only a 6.15% decrease in adsorption capacity after seven cycles. Additionally, PAOM exhibited excellent dynamic adsorption performance, and after 14 days of continuous filtration and adsorption, PAOM could extract 2.03 mg·g^-1 U(VI) from natural seawater.