Low-Speed Stop and Near Zero-Speed Start-to-Move Brake Noise: Effect of Moisture Adsorption, Prior Braking and Deceleration Rate

<div class="section abstract"><div class="htmlview paragraph">The influence of moisture adsorption, prior braking, and deceleration rate on the low-speed braking noise has been investigated, using copper-free disc pads on a passenger car. With increasing moisture adsorption time, decreasing severity of prior braking or increasing deceleration rate, the noise sound level increases for the air-borne exterior noise as well as for the structure-borne interior noise. The near-end stop noise and the zero-speed start-to-move noise show a good correlation. Also, a good correlation is found between the noise measured on a noise dynamometer and on a vehicle for the air-borne noise. All the variables need to be precisely controlled to achieve repeatable and reliable results for dynamometer and vehicle braking groan noise tests. It appears that the zero-speed start-to-move vehicle interior noise is caused by the pre-slip vibration of the brake: further research is needed.</div></div>