Numerical heat transfer analysis of steam injection into subcooled water

Steam direct contact condensation (DCC) into subcooled water may be encountered in different important industrial process applications, such as steam jet pumps, steam ejectors, pressurizers, and emergency cooling systems of nuclear reactor core. In this work, a numerical simulation study has been done for injection of steam into a tank full of subcooled water. In the simulations, the Eulerian multiphase flow in addition to a realizable k-epsilon turbulence model has been utilized. Moreover, a DCC model has been used for condensation capturing. Fluent software with a user-defined function (UDF) for the DCC model was employed for simulations. The results obtained from simulations were validated with experimental results, and a fair agreement was observed. This study considered the local Nusselt number (LNN) the most suitable parameter for investigating the heat transfer rate (HTR) at the computational cell level. Therefore, the contours of the LNN, its axial distribution, and radial distribution were studied with respect to the inlet pressure of injected steam, temperature of tank water, and location along the axis of the nozzle. The results reveal the fact that the value of the LNN reaches a maximum at the nozzle exit along the axis of the nozzle at 323 K tank water temperature. LNN decreases by increasing or decreasing the tank water temperature beyond 323 K. It is claimed that the heat transfer (HT) study at such a local scale has been conducted for the first time to the best of our knowledge, and it unfolds various crucial facts regarding steam-water interaction.