Correlation of the Near-Fault Pulse-like Ground Motion Characteristics with the Vulnerability of Buildings

Determining the impact of pulse-type earthquake characteristics on the vulnerability of base-isolated buildings under non-pounding conditions has yielded conflicting results in previous studies. Moreover, this issue has received less attention for pounding conditions, especially floor-to-floor pounding. Therefore, this study aims to investigate the correlation between pulse-type earthquake characteristics and the seismic response of buildings under both pounding and non-pounding conditions. In the first stage, three base-isolated buildings and one fixed-base building are analyzed separately under 40 pulse-type earthquakes using the nonlinear time history method. Three scenarios are then considered to account for pounding with adjacent buildings. In the first pounding scenario, a base-isolated building with an intermediate moment frame (IMF) is placed between two fixed-base buildings. The second scenario involves changing the base-isolated building’s superstructure system to a special moment frame (SMF). Finally, the third scenario increases the base isolation period (Tb) of the base-isolated building used in scenario two. The correlation between earthquake characteristics and the seismic response of buildings is assessed by linear regression and the Pearson correlation coefficient. The results demonstrate that peak ground acceleration (PGA) has a strong correlation with the seismic response of buildings under pounding conditions, while peak ground velocity (PGV) shows a stronger correlation under non-pounding conditions. However, predicting building vulnerability with a single pulse-type earthquake characteristic remains unreliable unless a large number of ground motions are considered. Otherwise, it is crucial to consider the correlation of all earthquake characteristics with seismic responses.