Preparation of electroless deposition of NiTiZr(P) quaternary alloy and their properties

The exceptional super elasticity and corrosion-resistance of Ni-Ti alloys have attracted a lot of attention and interest lately for a wide range of applications, and complex alloy components could be prepared effectively by different preparation techniques. Ni(P), Ni-Ti(P), Ni-Zr(P), and Ni-Ti -Zr(P) binary, ternary, and quaternary alloys were coated on mild steel by electroless deposition which is a method of plating metallic films on a substrate by the reduction of metallic complex ions in solution with the aid of reducing agent from an alkaline bath. The ternary Ni-Ti-Zr(P) alloy is considered to be one of the most promising high-temperature SMAs. SEM, XRD and EDS were used to examine the morphology, phase composition and elemental composition which demonstrate the microstructure of the deposits. The mechanical characteristics of the samples were examined through scratch test and micro hardness analysis and the value increased from 261 HV₂₀₀ to 405 HV₂₀₀ and that the coefficient of friction raised significantly from 0.23 to 3.5 owing to the presences of added elements in Ni(P) matrix. Polarization analysis and EIS were tested to evaluate the corrosion properties of coated samples in a non-deaerated 3.5 %wt. (NaCl) solution. The outcomes indicate that as the amount of Ti-Zr elements in the bath raised, the corrosion potential became more positive and the corrosion current density decreased to 14.903 μA/cm². Furthermore, Ni-Ti-Zr(P) alloy coating strengthens corrosion resistance in comparison to Ni(P).