Thermal buckling analysis of reinforced composite conical shells in acidic environments: Numerical and experimental investigation on the effects of nanoparticles

This study investigates the effects of acid penetration and temperature on the buckling behavior of conical composite shells, to enhance structural integrity and longevity in corrosive environments. The study explores the impact of acid exposure on thermal properties and examines the efficacy of incorporating nano-silica and nano-clay in preventing buckling. Additionally, it analyzes the influence of nanoparticles on the thermal, moisture, and mechanical properties of the composite material. Experimental assessments are conducted to measure material properties during exposure to a sulfuric acid solution, providing a comprehensive understanding of the material's behavior under extreme conditions. However, due to the complexity of investigating the combined effects of temperature, acid, and nanoparticles on composite shell buckling, a combined numerical and experimental approach is adopted to predict the critical buckling load. To this end, equations of conical shells under hygrothermal loading are derived, and the critical buckling load is determined through pre-buckling analysis. The Generalized Differential Quadrature (GDQ) method is employed to solve the hygrothermal buckling of the composite shell using experimentally obtained material properties. Comparative results are presented for different nanoparticles, shell geometries, and exposure times in acidic environments. The experiments reveal that adding nanoparticles enhances mechanical properties and reduces thermal and moisture expansion coefficients. Conversely, the acidic conditions deteriorate these properties. Numerical analysis demonstrates that incorporating nanoparticles significantly increases the critical buckling temperature, with nano-silica and nano-clay particles resulting in an 11.5 % and 34.2 % increase, respectively. However, acidic environments decrease the critical buckling temperature, with reductions of 32 % for unreinforced, 29 % for nano-silica reinforced, and 46 % for nano-clay reinforced composites after three months of exposure.