A new positive output DC–DC buck–boost converter based on modified boost and ZETA converters

A new DC-DC buck-boost converter with a wide conversion ratio is presented in this paper. The proposed buck-boost converter consists of a combination of modified boost converter and ZETA converter, which has the advantages of both converters such as continuous input/output current and positive polarity of the output voltage. The combination of these two converters achieves semi-quadratic voltage gain and makes the proposed converter suitable for industrial and renewable energy applications. With a voltage gain higher than that of the ZETA converter and modified boost converter, the proposed converter also reduces input current stress due to its continuity. Two operating states are available for this converter in continuous conduction mode. This converter has two switches that operate simultaneously and can be easily controlled. The converter's output voltage ripple and output capacitor current stress are reduced as a result of continuous output current. Computational analysis and the introduced structure efficiency considering the influence of parasitic elements are presented in this paper. The small signal modelling and closed-loop control, as well as simulation and experimental results are also presented. This converter has also been compared with other similar and recently presented topologies. Finally, a 40-60 W, 20-76 V for boost mode and 10 V for buck mode prototype was implemented to verify the accuracy of the computational analysis.