Effect of Damping on the Identification of Bridge Properties Using Vehicle Scanning Methods

Vehicle scanning methods are gaining popularity because of their ability to identify modal properties of several bridges with only one instrumentation setup, and several methods have been proposed in the last decade. In the numerical models used to develop and validate such methods, bridge damping is often overlooked, and its impact on the efficacy of vehicle scanning methods remains unknown. The present article addresses this knowledge gap by systematically investigating the effects of bridge damping on the efficacy of vehicle scanning methods in identifying the modal properties of bridges. For this, acceleration responses obtained from a numerical model of a bridge and vehicle are used. Four different scenarios are considered where vehicle damping, presence of road roughness, and traffic on the bridge are varied. Bridge damping is modeled using mass-proportional, stiffness-proportional, and Rayleigh damping models. The impacts of ignoring bridge damping or considering one of these damping models on the modal frequencies and mode shapes identified using the vehicle response are investigated by comparing the results. The outcomes of the numerical analysis show that ignoring bridge damping in vehicle scanning applications can significantly increase the efficacy of these methods. They also show that the identifiability of the bridge frequencies and bridge mode shapes from the vehicle response decreases significantly when bridge damping is considered. Further, the damping model used impacts which bridge modes can be identified because different damping models provide different modal damping ratios for each mode. The results highlight the importance of correctly simulating damping behavior of bridges, which is often ignored, to be able to correctly evaluate the efficacy of vehicle scanning methods, and they provide an important stepping stone for future studies in this field.