Experimental investigation of zinc ferrite/insulation oil nanofluid natural convection heat transfer, AC dielectric breakdown voltage, and thermophysical properties

Improving the thermal and dielectric properties of insulation oil (INO) with nanoadditives is an important challenge, and achieving dispersion stability in these nanofluids is quite challenging, necessitating further investigation. The main goal of this study is the synthesis and use of the hydrophobicity of zinc ferrite (ZnFe₂O₄) nanoparticles, which can improve both the thermal and dielectric properties of the INO. This oil is made from distillate (petroleum), including severely hydrotreated light naphthenic oil (75-85%) and severely hydrotreated light paraffinic oil (15-25%). A comprehensive investigation was carried out, involving the creation of nanofluids with ZnFe₂O₄ nanoparticles at various concentrations, and employing various characterization methods such as X-ray diffraction (XRD), Fourier-transform infrared (FTIR), scanning electron microscopy, energy dispersive X-ray (EDX), zeta potential analysis, and dynamic light scattering (DLS). The KD2 Pro thermal analyzer was used to investigate the thermal characteristics, including the thermal conductivity coefficient (TCC) and volumetric heat capacity (VHC). Under free convection conditions, the free convection heat transfer coefficient (FCHTC) and Nusselt numbers (Nu) were evaluated, revealing enhancements ranging from 14.15 to 11.7%. Furthermore, the most significant improvement observed in the AC Breakdown voltage (BDV) for nanofluids containing 0.1 wt% of ZnFe₂O₄ amounted to 17.3%. The most significant finding of this study is the improvement in the heat transfer performance, AC BDV, and stability of the nanofluids.