Thermal History and Hydrocarbon Accumulation Stages in Majiagou Formation of Ordovician in the East-Central Ordos Basin

The marine carbonates in the Ordovician Majiagou Formation in the Ordos Basin have significant exploration potential. Research has focused on their thermal history and hydrocarbon accumulation stages, as these are essential for guiding the exploration and development of hydrocarbons. In this paper, we study the thermal evolution history of the carbonate reservoirs of the Ordovician Majiagou Formation in the east-central Ordos Basin. Furthermore, petrographic and homogenization temperature studies of fluid inclusions were carried out to further reveal the hydrocarbon accumulation stages. The results demonstrate that the degree of thermal evolution of the Ordovician carbonate reservoirs is predominantly influenced by the deep thermal structure, exhibiting a trend of high to low values from south to north in the central region of the basin. The Fuxian area is located in the center of the Early Cretaceous thermal anomalies, with the maturity degree of the organic matter ranging from 1 to 3.2%, with a maximum value of 3.2%. The present geothermal gradient of the Ordovician Formation exhibits the characteristics of east–high and west–low, with an average of 28.6 °C/km. The average paleo-geotemperature gradient is 54.2 °C/km, the paleoheat flux is 55 mW/m2, and the maximum paleo-geotemperature reaches up to 270 °C. The thermal history recovery indicates that the Ordovician in the central part of the basin underwent three thermal evolution stages: (i) a slow warming stage before the Late Permian; (ii) a rapid warming stage from the end of the Late Permian to the end of the Early Cretaceous; (iii) a cooling stage after the Early Cretaceous, with the hydrocarbon production of hydrocarbon source rocks weakening. In the central part of the basin, the carbonate rock strata of the Majiagou Formation mainly developed asphalt inclusions, natural gas inclusions, and aqueous inclusions. The fluid inclusions can be classified into two stages. The early-stage fluid inclusions are mainly present in dissolution holes. The homogenization temperature is 110–130 °C; this coincides with the hydrocarbon charging period of 210–165 Ma, which corresponds to the end of the Triassic to the end of the Middle Jurassic. The late-stage fluid inclusions are in the dolomite vein or late calcite that filled the gypsum-model pores. The homogenization temperature is 160–170 °C; this coincides with the hydrocarbon charging period of 123–97 Ma, which corresponds to the late Early Cretaceous. Both hydrocarbon charging periods are in the rapid stratigraphic warming stage.