Color Modification of Silicone-Based Prosthetic Finger by 3D-Printed Mold

Dissatisfaction among upper limb prosthetic users is high, reaching over 70%, and 52% of upper limb amputees abandon their prosthetic devices due to limitations such as limited functionality, poor design/aesthetic, and improper fit. The conventional procedure of making prosthetics is time-consuming and expensive. This study was conducted to provide an alternative solution for the several issues of current prosthetic devices. 3D printing technology offers a promising alternative, providing greater accuracy, reduced labor time, and improved fit and comfort. This research explores the application of 3D printing for creating custom silicone prosthetic fingers, using Fused Deposition Modelling (FDM) for the mold. A high-resolution 3D scanner was employed to capture the precise anatomy of the patient’s hand, and CAD software was used to design molds that satisfied the patient preference and were reusable. The resulting prosthetics demonstrated good fit and patient satisfaction, though exact color matching remains a challenge, but still, it did demonstrate that it is possible to fabricate colored prosthetics. Performance tests, such as the Jebsen–Taylor Hand Function Test, indicated that while initial performance with the prosthetic was slightly lower, patient satisfaction and potential for improved functionality over time were high. This study underscores the potential of 3D printing to enhance the customization, cost-effectiveness, and overall quality of prosthetic devices, contributing to Sustainable Development Goals related to health and industry innovation.