Creep properties of heat-resistant ultrafine-grained Al (HITEMAL©) determined by small punch testing

Abstract The creep properties of thermally stable ultrafine-grained Al metal matrix composite strengthened and stabilized by continuous in situ amorphous Al 2 O 3 network (named HITEMAL © ) prepared by powder metallurgy (PM) were tested by small punch creep testing (SPCT) in the temperature range from 573 to 673 K. The experimental SPCT results were correlated and compared with the results obtained by conventional tensile creep testing. The mutual correlation between tensile and SPCT creep results based on the transition stress was proposed and used to correctly interpret the measured SPCT data. The creep behaviour of HITEMAL © is characterized by the high values of apparent stress exponents and by the presence of transition stress at which the apparent stress exponents significantly changed. The SPCT discs fractured by the radial cracks at low values of deflection with only limited creep deformation highly localized in the vicinity of the fracture surfaces. The detailed analysis of fractured SPCT discs by scanning electron microscopy showed ductile dimpled fracture surfaces with the presence of unusual high filament-like tearing edges. The comparison of obtained results with other PM Al-based alloys and composites confirmed a significantly higher creep performance of HITEMAL © at used testing conditions.