Application of a Composite Based on Magnetite Nanoparticles, Graphene Oxide, and an Ionic Liquid for the Extraction of Bisphenol A from Bottom Sediments by the Matrix Solid-Phase Dispersion Method

Abstract A composite based on Fe 3 O 4 nanoparticles, graphene oxide, and a ionic liquid (1-butyl-3-methylimidazolium-2-carboxylate) is proposed as a sorbent for the extraction of bisphenol A ( BPA ) from bottom sediments by matrix solid-phase dispersion ( MSPD ). The saturation magnetization of the synthesized sorbent is 34 emu/g. Grinding of bottom sediments and subsequent grinding with a sorbent was carried out in a ball mill. Some stages of MSPD were partially automated, in particular, the procedures of magnetic separation, BPA desorption, and sorbent regeneration. The recovery of BPA under the experimentally selected conditions (sorbent mass 0.5 g, time required to grind the sorbent 5 min) was 94%. The sorbent can withstand four sorption-desorption cycles without a loss of sorption capacity. To purify the matrix from interferents, washing with n -heptane was proposed. Bisphenol A was determined by gas chromatography–mass spectrometry after derivatization with acetic anhydride. The analytical characteristics of the method were established using model samples of bottom sediments artificially contaminated with BPA. The limit of determination using the developed method is 0.1 μg/kg, the linearity range of the calibration curve is 0.3–12 μg/kg ( r 2 = 0.994). As real samples for analysis, we used bottom sediments selected near the discharge of wastewater treatment plants in the city of Voronezh (Voronezh River and Don River). The BPA concentration in bottom sediments is 3.83–6.52 μg/kg.