DEVELOPMENT OF AN EXPRESS ASSESSMENT OF THE RESULTS OF GEOLOGICAL AND TECHNICAL MEASURES TAKEN INTO ACCOUNT OF THE GATHERING SYSTEM

This article provides a rationale for the method of «express» assessment of changes in well flow rate when performing geological and technical measures in an oil field. In view of the cluster configuration of wells that is widespread in Western Siberia, the author identifies two groups of well pads, one of which is influencing, the other is reacting. At the influencing well clusters, as a result of the implementation of geological and technical measures to increase extraction from the productive formation, an increase in the produced fluid occurs. This leads to destabilization of the equilibrium in the “reservoir – well – pipeline” system. The consequence of a violation of this balance is an increase in the load on the reservoir fluid pumped in oil and gas gathering pipelines on individual branches of the field collection system. This leads to a redistribution of wellhead pressures at production wells, which, in turn, also leads to a change in bottomhole pressure and a change in well productivity. The author defines well pads where there is no increase in production, but where there is a change in pressure at the wellheads as reactive. With an increase in linear pressure on the pads, the energy balance in the operating production wells at the reacting well pads shifts towards a decrease in flow rate. Conversely, when wellhead pressure decreases, well productivity increases. These parameters will change until the energy balance of pressures in the wells is achieved. In connection with the above, within the framework of this work, an approach is presented for assessing changes in well operating parameters with increasing production in the field. An example of testing the proposed approach on a complex integrated model is given. To test this approach for adequacy, a comparison was made of theoretical calculations of changes in the operation of real wells with calculations performed on a customized complex integrated model of an oil field. It is worth noting that this type of calculation is characterized as approximate. Its use is advisable exclusively at the stage of preparing programs for performing geological and technical measures to determine reservoir zones in which the negative effect of increasing production will be minimal.