The Influence of Structural Parameters on the Ultimate Strength Capacity of a Designed Vertical Axis Turbine Blade for Ocean Current Power Generators

An ocean current power generator is a power plant that uses kinetic energy from ocean currents to generate electricity. Considering that the blade is the component that receives the biggest load from seawater currents, its structural design should be strong enough to sustain the applied load. Therefore, this research seeks a suitable design and material for turbine blades using the finite element method (FEM). A NACA 0021 blade with a total length of 3600 mm is used for the base geometry. A parametric study was conducted by varying the spacing between the supports, the pitch angle, the material, and the frame model. Considering a high load, the suitable amount of space between the stiffeners was 2200 mm. It was found that a pitch angle variation between −20° and +20° did not significantly affect the strength of the blade structure. The frame geometry variation caused the rigidity and cross-section area of the blade to differ. Therefore, web-shaped or bar-shaped frames are preferable because they have optimal maximum load-to-weight ratios. The material variation analysis resulted in CFRP material being chosen because it had a high maximum load/weight ratio and a high maximum stress.