Numerical simulation of dynamic loss and total loss in the REBCO tapes under perpendicular AC magnetic fields up to 8 T at 20 K and 50 K

REBCO tapes carry DC current under AC magnetic fields in proposed HTS fusion applications. AC loss will be generated in the process and it is important to understand the AC loss behaviour for safe operation of the fusion magnets. In this work, magnetisation loss (Qm), dynamic resistance (Rdyn), and total loss (Qtotal) in four different REBCO tapes are numerically studied, using the measured JcB,θ and nB,θ, for the magnetic field amplitude applied perpendicularly up to 8 T at 20 K and 50 K, where JcB,θ represents the magnetic field and field angle (θ) dependent critical current density. The peak of Theva JcB,θ data is different from that of other tapes. We artificially shifted the ab-plane peak of Theva JcB,θ to the left by 25° to match the peak value. The newly shifted data is named as Theva-shift, which was also investigated to study the influence of the Theva peak shift on AC loss. The normalised DC transport current level (i = It/Ic0) ranges from 0.05 to 0.9, where the DC current amplitude and the self-critical current of the tape are represented by It and Ic0, respectively. The simulation results show that the AC losses deviate significantly from the Brandt-Indenbom (BI) equation at high magnetic fields. Jc and instantaneous loss curves for different tapes show correlation at high magnetic fields. The simulation results also show how different JcB,θ characteristics for different tapes influence AC losses. When AC loss values are scaled by the self-field critical current, Qm without current and Qtotal with current in the different tapes show a good agreement. It implies that the temperature dependence of the two types of loss can be calculated from a known loss at one temperature and the self-field critical current.