Analysis of Wave Load Characteristics of Hovercraft Based on Model Test

The prediction of the wave load on a hovercraft is essential for the design of the hull structure and safety. However, theoretical methods for the prediction of wave loads are still not mature enough due to the unique and complex nature of the air cushion structure, and numerical modeling and simulation are challenging due to the complexity of the gas-solid-liquid three-phase coupling, so the study of wave loads on hovercrafts still relies on experimentation. In this study, we aim to analyze the wave load response characteristics of a four-chamber hovercraft by conducting a wave load model test under medium/low sea states. The load components and amplitude-frequency response characteristics were thoroughly analyzed based on the acquired data of the cushion pressure, acceleration, and bending moment. The main characteristics of the wave-induced response of the hovercraft were described in detail, and an analytical relationship between the cushion pressure and hull acceleration was derived. The reliability of the experimental results was confirmed through a comparison with the derived results. The relationship between the cushion pressure and cushion volume was investigated in terms of the observed geometric volume of the air chamber, and the relationship between the cushion pressure and flow rate was analyzed to validate the derivation of the theory of wave loads on hovercrafts.