Does the Novel Dual Source Heat Pump (DSHP) Out-Perform the Ideal DSHP? Experimentation Versus Simulation of DSHP Based Thermodynamic Irreversibility of the Throttle Valve

Purpose: The air-source heat pumps are associated with continuous frosting problems. To ensure a more energy efficiency technology, the novel dual-source heat pump (DSHP) was developed. This article aims to confirm and compare the energy performance of the novel dual-source heat pump (DSHP) with the performance of an ideal heat pump. Methods: We applied an experimental analysis from an installed DSHP system with converters and other components to obtain the energy performance of the DSHP, while the performance of an ideal pump was obtained from simulation based on the theoretical algorithm of the basic principle of the thermodynamic irreversibility of the throttle valve. Results: We found that the Ideal (simulated) DSHP has a higher coefficient of performance (COP) than the installed (experimented) DSHP. The Ideal DSHP’s COP of 4.52 is higher than the Novel DSHP’s COP, which range from 1.78 (day 3) to 2.01 (day 1). The DSHP are power efficient, which reduces carbon emission from whatever power source that is been used. Implications: Energy efficiency in buildings has severe implications for global warmings and the need for sustainability. Because the modern ventilation system utilise energy from waste and heat recovery to power heating and cooling systems, the DSHP remains promising for future generations of building ventilation design. Originality/Value: The value of the study is because it completes an experiment that analyse the performance of the DSHP, comparing the outcomes with results from a simulation based on an Ideal system.