Design and performance analysis of an embedded amplified piezoelectric jetting dispensing valve

Abstract In order to satisfy the market’s demand for high-consistency, micro-dispensing of colloids, an embedded lever-amplified piezoelectric dispensing valve based on flexure hinge is designed. This structure has stable jetting performance, strong reliability, and can achieve micro-dispensing of medium and low viscosity glue. Theoretical analysis shows that the output displacement of the piezoelectric stack can meet the displacement requirement of dispensing after being amplified by this amplification mechanism. And the output displacement and mode of the amplification mechanism are calculated and analyzed by simulation. The rationality of the simulation model is verified by experiments, and the effect law of driving voltage, signal duty cycle and working frequency on the mass of glue droplets is obtained. The results show that under the conditions of driving voltage 100 V, duty cycle 50%, glue supply pressure 0.6 MPa, working frequency 100 Hz, the consistency deviation of single dispensing amount is ±2.01%, as a whole, 0.34–0.38 mg of uniform tiny glue dots can be obtained. The experimental results have verified the stability and micro-dispensing performance of the embedded lever amplification piezoelectric dispensing valve, providing reference for the subsequent application and research of jet dispensing.