Multiscale simulation of spray and mixture formation for a coaxial atomizer

Coaxial atomization is an established atomization strategy for many stationary combustion systems. While modeling spray formation in coaxial atomization is challenging due to the existence of a wide range of length and time scales, typical models introduce a substantial uncertainty for Euler–Lagrange simulations of the actual application, e.g., a spray flame. To reduce uncertainties, a recently proposed multiscale approach is adopted for simulations of realistic applications in this work. The multiscale approach uses three one-way coupled simulation domains that cover the internal nozzle flow, the interfacial flow of the near-field, and the dispersed flow of the far-field. The capabilities of the approach are explored by applying it to a standardized non-reacting experiment from the flame spray pyrolysis research community. In order to assess the relevance for application simulations, results are discussed in the context of mixture formation. The results are compared against shadowgraphy images of the near-field and measured droplet statistics in the far-field. It is found that the multiscale approach is capable of providing similarly accurate droplet statistics as experiments or models derived from them. In addition, it is found that the breakup dynamics in the near-field introduce substantial mixture fraction fluctuations. These fluctuations are only included because of the deterministic coupling of the multiscale approach and are typically neglected in conventional approaches. • Multiscale simulations for a real coaxial atomizer are performed. • The capability of the multiscale approach is explored using experimental measurements. • The relevance of spray formation modeling limitations is highlighted. • The importance of the breakup dynamic for the mixture formation is demonstrated.