Study of the thermal effect of hot and cold working on the mechanical properties of medium carbon steel

Medium carbon steel is widely used in industries due to its favourable strength and flexibility. However, they are highly prone to deformation processes that affect their impact resistance and corrosion rate. This research examines the effects of hot and cold working on the mechanical properties of medium-carbon steel. Experimental tests were conducted on medium carbon steel samples subjected to hot and cold working treatment procedures via funnels for the hot working. Deformation techniques such as rolling and bending are employed by subjecting the materials to a high temperature of 900oC. At the same time, in this study, cold working uses room temperature between 0oC to 22 oC for both rolling and bending. The results show that hot bending improves the hardness property in the bending analysis, having 185.64, as opposed to cold bending, which is 174.33. It can be seen that the cold rolling treatment of medium carbon steel increases the hardness property by 179.84 compared with hot rolling techniques, which have a hardness of 161.63. The results from the rolling test show that the tensile stress at the yield point of the zero slopes is lower during the hot working process, having 598.05090 MPa, compared with the cold working results of 665.43718 MPa. However, the results of the elasticity modules show that hot working increases it with a value of 32885.24170 MPa compared with 28923.17810, respectively. It can be concluded that parameter optimization of the specification of medium carbon steel determined the specific treatment needed for the manufacturing industry to produce quality materials.