Solid-Phase Extractants Based on Carbon Nanotubes for Preconcentrating Noble Metals from Hydrochloric Acid Media

Effective solid-phase extractants (SPE) based on multi-walled carbon nanotubes (CNT) of various structures modified with an organic reagent, 2-mercaptobenzothiazole, were developed. Using scanning and transmission electron microscopy, the morphological and structural features of SPE samples and their elemental composition were determined. It was shown that the specific surface area of the modified CNT is approximately two times lower compared to the original CNT. It was revealed that the modified materials are CNT coils coated with a uniform organic shell 10−15 nm thick. The sorption capacity of the original nanotubes in 1.0 M HCl and of their modified forms (in 0.1−3.0 M HCl) at room temperature and at 80°C was determined. It was found out that in strongly acidic media, SPE based on G-183 CNT and 2-mercaptobenzothiazole, effectively sorbs Pt, Pd and Au at room temperature, and Ru and Rh at the temperature of 80°C. A possibility of the selective extraction of platinum group metals and gold with this sorbent in the presence of macroquantities of Al, Fe, Cu, Ca and Mg was assessed.