Energy, exergy, exergy‐economic, and environmental evaluation of an optimized hybrid photovoltaic heat pump system with solar collector and PCM

Abstract Nowadays, the use of hybrid systems has become very common all over the world. In this study, the aim is to minimize the use of grid energy to provide heating and cooling energy with the help of a hybrid heat pump equipped with a flat solar collector, phase change material (PCM), and photovoltaic (PV) panels. To achieve the best results, a numerical dynamic model consisting of different solar PV panels in three models, batteries, inverters, and hybrid heat pump along with collector and PCM has been modeled by solving Engineering Equation Solver (EES) and TRNSYS software. According to the proposed scenarios, multi‐objective optimization has been done to simultaneously improve the study answers in several sections by multi‐objective particle swarm optimization algorithm with MATLAB software. Also, economic and environmental optimization is also presented separately for comparing and reviewing solutions. The results of multi‐objective optimization show that the amount of lifecycle cost (LCC) when using polycrystalline panel is 21.26% lower than monocrystalline panel and 38.71% higher than thin film panel. As a result, according to the specific conditions and attitude, you can choose the desired system. Also, in the economic optimization, it was found that the best system is related to the polycrystalline panel, the volume of PCM used in the system is equal to 1 , the number of panels used is 18, and the minimum amount of LCC is $3929.08.