Coupled Wall Boiling and Population Balance Model for High Void Fraction Flows Under Sub-Cooled Nucleate Boiling Regime: Model Development and Validation

Abstract The subcooled flow boiling of water in a vertical annulus channel is studied numerically at low-pressure conditions. The two-fluid model is developed with flow-regime dependent interfacial transfers for mass, momentum, and energy using the algebraic interfacial area density (AIAD) framework. A discrete population balance model is used to mechanistically determine the vapor bubble diameter in the flow channel by considering the bubble aggregation and breakup effects. Energy balance at the heated wall for the subcooled nucleate boiling is handled using a suitable wall boiling model. A coupling is achieved between the discrete population balance and the wall boiling model for the nucleation and the growth rate of the vapor bubbles along the heated wall. The developed model simulates the reference experimental cases of flow boiling in a vertical channel for various flow and thermal conditions. At low wall heat flux, the wall boiling generates vapor bubbles near the heated wall and within the bubbly flow regime. With an increase in the wall heat flux, the aggregation and evaporation cause the formation of larger bubbles, which progress toward the flow channel core region, a phase that is representative of the transitional flow regime. The model's capability to predict such flow regime transition is validated with the experimental results. The bubble aggregation is found to be dominant compared to the breakup, and thus, proper choice of the aggregation factor is important for the accurate prediction of vapor parameters for the subcooled flow boiling at low-pressure conditions.