Finite Element Method Simulation Study on the Temperature Field of Mass Concrete with Phase Change Material

Phase change materials can be converted between solid, liquid, and gaseous states, absorbing or releasing a large amount of heat. PCM is incorporated into concrete to adjust the temperature difference between inside and outside of concrete, which can reduce cracking. In this paper, the finite element analysis method is used to establish the model of an ordinary concrete structure, doped with phase change materials, on the basis of mechanical properties and a temperature regulation test performed by calculating the adiabatic temperature rise of concrete with different contents of composite phase change material, comparing the experimental and simulation results of the ordinary concrete structures with phase change materials, and analyzing the change in temperature field of the concrete structure with the content of self-prepared composite phase change materials. It is found that the addition of self-prepared composite phase change materials reduces the temperature peak of the concrete structure in the stage of hydration heat and delays the time taken to reach the temperature peak. Then, the temperature field of the phase change mass concrete structure is established, and the influence law of composite phase change material admixture on the temperature field of mass concrete is summarized through the time–temperature curves of different admixture amounts and positions so as to predict the possibility of cracks in mass concrete.