Feasibility study on the heat transfer enhancement of gap flow induced by wasted vibration of linear compressor body

Refrigerators account for 20–30 % of household electricity consumption, with the compressor contributing to 80 % of the total consumption. Therefore, it is essential to increase the compressor efficiency. One approach to enhance compressor performance involves increasing heat dissipation to lower the temperature of the suction system and boost the refrigerant density entering the suction chamber. To achieve that innovatively, we harnessed the waste vibration of the linear compressor body to create a gap flow between the body and the housing, enhancing compressor performance by augmenting heat dissipation. Measurements of gap flow temperature, cylinder surface temperature, and heat flux on the cylinder surface were conducted, varying the RPM, gap size, and the shape of the gap flow path. We also observed variations in the gap flow rate with RPM and stroke. The results revealed that gap temperature and heat flux increased with higher RPM and smaller gap size, and the application of ribs to the gap flow path proved to be more effective in enhancing temperature and heat flux. Additionally, it is anticipated that heat flux will further increase with a longer stroke as the flow rate increases. Therefore, to optimize heat dissipation through gap flow using the waste vibration of the compressor body, it is advantageous to employ a smaller gap size, higher RPM, longer stroke, and apply ribs to the gap flow path. Future research should focus on verifying the effectiveness of increased heat dissipation and improved Energy Efficiency Ratio (EER) through actual compressor experiments.